Robotino3 cpu board

From RobotinoWiki
Revision as of 10:44, 1 November 2013 by Verbeek (talk | contribs) (→‎How to install USB bootloader)

Robotino3 CPU Jumpers Connectors.png

How to install USB bootloader

  1. Make sure CPU is powered on all the time by putting a jumper on Power button connector pins 4 and 6. This is the same as pressing the power button continuously.
  2. Put a jumper on RST enable
  3. Put a jumper on ISP enable
  4. Connect the FTDI breakout adapter to ISP_X
  5. Download the latest USB bootloader HEX file
  6. Get Flashmagic from flashmagictool.com. Use the settings shown below. Replace the path to the HEX file with the path to the previously downloaded HEX file

Robotino3 flashmagic.png

Retrieved from "https://wiki.openrobotino.org/index.php?title=Robotino3_cpu_board&oldid=2763"