Difference between revisions of "Robotino3 cpu board"
From RobotinoWiki
(→How to install USB bootloader) |
|||
| Line 7: | Line 7: | ||
# Connect the FTDI breakout adapter to ISP_X | # Connect the FTDI breakout adapter to ISP_X | ||
# Download the latest [http://svn.openrobotino.org/firmware/Robotino3/trunk/usb_bootloader/Memory.hex USB bootloader HEX file] | # Download the latest [http://svn.openrobotino.org/firmware/Robotino3/trunk/usb_bootloader/Memory.hex USB bootloader HEX file] | ||
| + | # Get Flashmagic from [http://www.flashmagictool.com/ flashmagictool.com]. Use the settings shown below. Replace the path to the HEX file with the path to the previously downloaded HEX file | ||
| + | |||
| + | [[Image:Robotino3_flashmagic.png]] | ||
Revision as of 10:44, 1 November 2013
How to install USB bootloader
- Make sure CPU is powered on all the time by putting a jumper on Power button connector pins 4 and 6. This is the same as pressing the power button continuously.
- Put a jumper on RST enable
- Put a jumper on ISP enable
- Connect the FTDI breakout adapter to ISP_X
- Download the latest USB bootloader HEX file
- Get Flashmagic from flashmagictool.com. Use the settings shown below. Replace the path to the HEX file with the path to the previously downloaded HEX file
