Difference between revisions of "Robotino3 cpu board"
From RobotinoWiki
Line 6: | Line 6: | ||
# Put a jumper on ''ISP enable'' | # Put a jumper on ''ISP enable'' | ||
# Connect the FTDI breakout adapter to ISP_X | # Connect the FTDI breakout adapter to ISP_X | ||
+ | # Download the latest [http://svn.openrobotino.org/firmware/Robotino3/trunk/usb_bootloader/Memory.hex USB bootloader HEX file] |
Revision as of 10:40, 1 November 2013
How to install USB bootloader
- Make sure CPU is powered on all the time by putting a jumper on Power button connector pins 4 and 6. This is the same as pressing the power button continuously.
- Put a jumper on RST enable
- Put a jumper on ISP enable
- Connect the FTDI breakout adapter to ISP_X
- Download the latest USB bootloader HEX file