CBHA Firmware programming

From RobotinoWiki

Revision as of 14:05, 20 September 2012 by Verbeek (talk | contribs) (→‎Enter the USB bootloader)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Enter the USB bootloader

Reset the RobotinoXT device by shorting pin 2 and 5 on the RS232 connector.

Write the new firmware

Retrieved from "https://wiki.openrobotino.org/index.php?title=CBHA_Firmware_programming&oldid=2490"