Difference between revisions of "Allnet ap"
From RobotinoWiki
(→allnet_write_festo_settings.sh) |
(→allnet_write_festo_settings.sh) |
||
Line 12: | Line 12: | ||
===[http://svn.openrobotino.org/trunk/openrobotino1/daemons/lcdd/scripts/allnet_write_festo_settings.sh allnet_write_festo_settings.sh]=== | ===[http://svn.openrobotino.org/trunk/openrobotino1/daemons/lcdd/scripts/allnet_write_festo_settings.sh allnet_write_festo_settings.sh]=== | ||
− | Writes Festo settings to a AP with factory defaults. Takes the Robotino ID as parameter. | + | Writes Festo settings to a AP with factory defaults. Takes the Robotino ID as parameter. The Robotino ID is a string made of two 3 digits numbers (xxx.yyy). |
Only works if AP is in AP mode. | Only works if AP is in AP mode. | ||
[[Image:Allnet_mode_switch.jpg|right|thumb|200px|Switch the mode (AP or Client) of the AP.]] | [[Image:Allnet_mode_switch.jpg|right|thumb|200px|Switch the mode (AP or Client) of the AP.]] | ||
+ | |||
+ | When finished the AP is configured as follows: | ||
+ | :SSID: Robotino.ID | ||
+ | :channel: 6 | ||
+ | :no encryption | ||
+ | :DHCP server enabled. Range: 172.26.202.1 to 172.26.201.100 netmask 255.255.0.0 |
Revision as of 14:33, 16 January 2012
Robotino ships with an internal wireless accesspoint/bridge (AP). The AP is managed by a couple of bash scripts.
allnet_find.sh
Searches for the AP in different configurations.
Factory default:
- IP address 192.168.1.1/255.255.255.0
- User/Password: admin/admin
Festo settings:
- IP address 172.26.101.1/255.255.0.0
- User/Password: admin/apap6
allnet_write_festo_settings.sh
Writes Festo settings to a AP with factory defaults. Takes the Robotino ID as parameter. The Robotino ID is a string made of two 3 digits numbers (xxx.yyy).
Only works if AP is in AP mode.
When finished the AP is configured as follows:
- SSID: Robotino.ID
- channel: 6
- no encryption
- DHCP server enabled. Range: 172.26.202.1 to 172.26.201.100 netmask 255.255.0.0