From RobotinoWiki
Revision as of 09:16, 30 November 2012 by Verbeek (talk | contribs) (Board)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Robotino grappler.png

Button 1 (green) sends the current servo positions to the attached device (e.g. Robotino with running arm daemon or a Windows PC with running arm debugger) to store them.
Button 2 (red) powers the servos on and off. If the servos are powered, the button's LED is on.

Updating the firmware


Grappler platine.jpg

Dynamixel connector

  • 0 : 18V Connect RX-64 here
  • 1 : 14.4V Connect RX-28 here
  • 2 : 10.8V for smaller servos