Difference between revisions of "Grappler"

From RobotinoWiki
Line 2: Line 2:
  
 
Button 1 (green) sends the current servo positions to the attached device (e.g. Robotino with running arm daemon or a Windows PC with running arm debugger) to store them.<br/>
 
Button 1 (green) sends the current servo positions to the attached device (e.g. Robotino with running arm daemon or a Windows PC with running arm debugger) to store them.<br/>
Button 2 (red) powers the servos on and off. If the servos are powered, the switch's LED is on.
+
Button 2 (red) powers the servos on and off. If the servos are powered, the button's LED is on.
  
 
[[Updating the firmware]]
 
[[Updating the firmware]]

Revision as of 11:31, 30 May 2011

Robotino grappler.png

Button 1 (green) sends the current servo positions to the attached device (e.g. Robotino with running arm daemon or a Windows PC with running arm debugger) to store them.
Button 2 (red) powers the servos on and off. If the servos are powered, the button's LED is on.

Updating the firmware