|
|
Line 5: |
Line 5: |
| | | |
| ==Fleet Management Commands Pushed to the Fleet / Master== | | ==Fleet Management Commands Pushed to the Fleet / Master== |
− |
| |
| | | |
| | | |
| [http://doc.openrobotino.org/ChangeLog/FleetInterface_JSON/commands_examples_json.php Commands Examples JSON] | | [http://doc.openrobotino.org/ChangeLog/FleetInterface_JSON/commands_examples_json.php Commands Examples JSON] |
− |
| |
| | | |
| | | |
Revision as of 17:44, 8 August 2018
TCP/IP Communication Protocol based in JSON to use FleetLevel Services
This page describes the interface for the json branch of smartsoft-robotino running on Ubuntu 16.04.
Fleet Management Commands Pushed to the Fleet / Master
Commands Examples JSON
Command-Type
|
Usage Example
|
Description
|
Position Handling
|
teach-position |
|
Teaches a list of positions. If position ID already exists position is overwritten. Type could be of value pose or parking, parking positions will be used to park idle robots in automatic job assignment mode.
|
replace-positions |
|
Similar as teach-position, but all existing positions are replaced by the new ones.
|
replace-stations |
|
Replace the memorized stations with new ones. station-type: SMALL-MPS CS-MPS MANUAL-STATION docking-type: LASER-IR LASER VISION approach-location: id of the pose to approach the station
|
delete-position |
|
Delete position with PositionID. If there is no position with PositionID nothing happens.
|
delete-all-positions |
|
Deletes all positions.
|
delete-all-stations |
|
Deletes all stations.
|
teach-current-position |
|
Assign the current global position the robot with the RobotinoID the ID 1
|
Map Handling
|
start-mapping |
|
Start creation of a new map (SLAM) using a specific robot. The mapname is optional, if none is given a time-stamp is used (map-YYYY-MM-DD_HH-MM-SS).
|
abort-mapping |
|
Abort the creation of a new map (new map is discarded). The current default map is reloaded in the localization (global localization is triggered). The RobtinoID is optional of not given the command is forwarded to all robots.
|
stop-mapping |
|
Stop map creation. New map is saved in the MapStorageDirectory. The new map is set as default map and is used for localization.
|
reload-default-map |
|
ReLoadDeafault map for navigation and localization, as well as the corresponding poses from file. Global localization is used unless SetRobotPose is called afterwards.
|
COORDINATED NAVIGATION HANDLING
|
reload-default-paths |
|
ReloadDefaultPaths path-map for paths based navigation.
|
clear-all-path-network-nodes |
|
Frees all nodes currently allocated by the robot (is acknowledged by command-response TODO add LINK)
|
OPERATION MODE HANDLING
|
set-operation-mode
|
|
- ROBOTINOID number of Robotino to change the mode for.
- MODE:
- OUTOFSERVICE do NOT auto-assign jobs to Robotino
- AUTO auto-assign jobs to Robotino.
- MANUAL do NOT auto-assign jobs to Robotino, but assign to target Robotino when individual task received.
|
shutdown-robot
|
|
Stop all SmartSoft components in a coordinated manner and remove robot from fleet. In case the master is shutdown the slaves are as well.
|
clear-error |
|
|
abort-job-and-clear-error |
|
|
OTHER
|
set-robot-pose |
|
Set the current pose of the robot x y in meter phi in DEG.
|
manual-acknowledge
|
|
Acknowledge the Robotino that the box is placed/removed from it after reaching the manual pose(no docking station), only active after get-manual-load-unload-acknowledge pushed from the fleet.
|
end-task |
|
Terminates the ongoing task and stops any movement --> set robot mode to OUTOFSERVICE The RobotinoID is optional, without the id the command is distributed to all robots.
|
pause-robot |
|
Halt the Robotinos movement, (jobs or other activities are not affected) The RobotinoID is optional, without the id the command is distributed to all robots.
|
continue-robot |
|
Resumes the robots movement The RobotinoID is optional, without the id the command is distributed to all robots.
|
Information Queries send to the Fleet / Master
Information Query Examples JSON
Command-Type
|
Usage Example
|
Description
|
Information Queries
|
get-all-positions |
|
Reads the list of all kown positions with its ID and Name
|
get-all-stations |
|
Reads the list of all taught station
|
get-robot-fleet-type |
|
Get the fleet-type of the robotino (transport, manipulation, etc.)
|
get-robot-info
|
|
|
get-all-robot-ids
|
|
Reads all the RobotinoIDs
|
get-fleet-state
|
|
Get state of all robots in the fleet.
|
get-symbolic-fleet-state
|
get-robot-id-master-master-components-run-on
|
|
Get the id of the robot the master components run on (-1) of the components are not running on a robot within the fleet.
|
get-map-storage-directory
|
Information Queries / Jobs
|
get-job-info |
|
|
get-job-error |
|
|
Jobs Pushed to the Fleet
Jobs Examples JSON
Command
|
Usage Example
|
Description
|
Push Job
|
PushJob JOBTYPE JOBID PRIORITY ROBOTINOID ..... |
|
Push an job to the fleet (parameters depend on job type)
|
goto-position
|
|
- GotoPosition
- JOBID unique number generated by the MES >=1
- PRIORITY currently not used
- ROBOTINOID number of Robotino that should do the job. The Robotino number is configured through the web-interface of each Robotino. The Robotino number should be made visible on each Robotino. Giving a -1 as ROBOTINOID indicates that the planner should automatically choose the Robotino fullfilling this job.
- POSE pose id where to go
|
deliver-from-to
|
|
- DeliverFromTo
- JOBID unique number generated by the MES
- PRIORITY currently not used
- ROBOTINOID number of Robotino that should do the job. The Robotino number is configured through the web-interface of each Robotino. The Robotino number should be made visible on each Robotino. Giving a -1 as ROBOTINOID indicates that the planner should automatically choose the Robotino fullfilling this job.
- FROMSTATION station id from where to load the box
- FROMBELT belt id from where to load the box
- TOSTATION station id where to unload the box
- TOBELT belt id where to unload the box
|
commissioning
|
|
- RobotCommissioning
- JOBID unique number generated by the MES
- PRIORITY currently not used
- ROBOTINOID number of Robotino that should do the job. The Robotino number is configured through the web-interface of each Robotino. The Robotino number should be made visible on each Robotino. Giving a -1 as ROBOTINOID indicates that the planner should automatically choose the Robotino fullfilling this job.
- COMMISSIONINGROBOT id of the robot performing the commissioning (location of robot will be used to approach)
- BOXFROMSTATION station id where to load the box
- BOXFROMBELT belt id where to load the box
- TOSTATION station id where to unload the box
- TOBELT belt id where to unload the box
- [ORDER_ITEM QUANTITY]+ List of ITEMS to be commissioned (item type and the quantity of the item)
|
follow-person
|
|
- FollowPerson
- JOBID unique number generated by the MES
- PRIORITY currently not used
- ROBOTINOID number of Robotino that should do the job. The Robotino number is configured through the web-interface of each Robotino. The Robotino number should be made visible on each Robotino. Giving a -1 as ROBOTINOID indicates that the planner should automatically choose the Robotino fullfilling this job.
|
mps-docking
|
|
- MPSDocking
- JOBID unique number generated by the MES
- PRIORITY currently not used
- ROBOTINOID number of Robotino that should do the job. The Robotino number is configured through the web-interface of each Robotino. The Robotino number should be made visible on each Robotino. Giving a -1 as ROBOTINOID indicates that the planner should automatically choose the Robotino fullfilling this job.
- STATIONID station id to dock to
- FROMBELT belt id where to dock to
- [DOCK|UNDOCK] the action taken, docking or undocking to a mps station
|
mps-loading
|
|
- MPSLoading
- JOBID unique number generated by the MES
- PRIORITY currently not used
- ROBOTINOID number of Robotino that should do the job. The Robotino number is configured through the web-interface of each Robotino. The Robotino number should be made visible on each Robotino. Giving a -1 as ROBOTINOID indicates that the planner should automatically choose the Robotino fullfilling this job.
- [LOAD|UNLOAD] the action taken, load or unload something from a map station
- LOADMANUAL 1 or 0 action is performed manual not using the conveyor
|
battery-charger-docking
|
|
- BatteryChargerDocking
- JOBID unique number generated by the MES
- PRIORITY currently not used
- ROBOTINOID number of Robotino that should do the job. The Robotino number is configured through the web-interface of each Robotino. The Robotino number should be made visible on each Robotino. Giving a -1 as ROBOTINOID indicates that the planner should automatically choose the Robotino fullfilling this job.
- [DOCK|UNDOCK] the action taken, docking or undocking to a charger
|
robot-gripper
|
|
- RobotGripper
- JOBID unique number generated by the MES
- PRIORITY currently not used
- ROBOTINOID number of Robotino that should do the job. The Robotino number is configured through the web-interface of each Robotino. The Robotino number should be made visible on each Robotino. Giving a -1 as ROBOTINOID indicates that the planner should automatically choose the Robotino fullfilling this job.
- [GRASP|RELEASE] the action taken, docking or undocking to a charger
|
Update Job
|
update-job follow-person start-follow-person
|
|
- StartFollowPerson
- JOBID unique number generated by the MES
- X X position of the person to follow in map coordinate system in m
- Y Y position of the person to follow in map coordinate system in m
|
End/Delete Job
|
delete-job |
|
Delete an already pushed, but not yet started, job. --> response: DeleteJob jobid:"id" success OR DeleteJob jobid:"id" failed if the job is already running or fished
|
end-job |
|
JOBID unique number generated by the MES
|
<NOT YET> intercept-job |
|
Intercept the job, other commands can be executed meanwhile
|
<NOT YET> continue-job |
|
Continue the intercepted job.
|
Messages send from Fleet / Master
Pushed Messages Examples JSON
Command
|
Usage Example
|
Description
|
Acknowledgements
|
get-manual-load-unload-acknowledge
|
|
Pushed by SmartSoft when manual pose(no docking station) reached and waiting for acknowledgement after placing/removing the box
|
Robot State Change
|
robot-state-change
|
|
|
Job State Change
|
job-state-change
|
|
STATE being one of the following strings
- NOTAVAILABLE
- STARTED
- DOCKING
- UNDOCKING
- DRIVING
- LOADING
- UNLOADING
- FINISHED
- ABORTED
- NOTSTARTED
- ERROR
- CHARGER-DOCKING
- CHARGER-UNDOCKING
- CHARGER-UNDOCKING-DONE
Pushed by SmartSoft on state change.
|
job-state-change-error
|
|
ERROR string
|
Description
|
NOERROR
|
|
GotoPosition PATH_BLOCKED
|
Robots path blocked, no further movement possible
|
MPSDocking UNDOCK ROBOT_NOT_DOCKED
|
Robot is not docked but job tells to undock
|
DockTo NO_DOCK_STATION
|
Robot not close to the docking station(If the laser scanner intensity value is not as desired)
|
LoadBox BOX_PRESENT
|
Robot is already having a box on top(detected by "Box available" digital signal)
|
LoadBox NO_RESPONSE_FROM_STATION
|
The transport station has nothing to load(detected by "Station Ready" digital signal)
|
LoadBox NO_BOX
|
The box was not sucessfully loaded from the transport station(detected by "Box available" digital signal)
|
UnloadBox NO_RESPONSE_FROM_STATION
|
The transport station is not ready to receive a box(detected by "Station Ready" digital signal)
|
UnloadBox NO_BOX
|
No box on top of the Robot(detected by "Box available" digital signal)
|
UnloadBox BOX_PRESENT
|
Task terminated but a box is still present on the robot(detected by "Box available" digital signal)
|
DockToCharger NO_CHARGER
|
External power supply not found(detected by internal sensor "Battery")
|
BatteryChargerDocking UNDOCK ROBOT_NOT_DOCKED
|
Robot is not docked but job tells to undock
|
BatteryChargerDocking UNDOCK POWER_STILL_CONNECTED
|
Undocking from charger failed powersupply still connected
|
Pushed by SmartSoft when error occurs.
|
Smartsoft